Pulsafeeder Pulsa GLM DM7 Manuel d'utilisateur télécharger pdf (Page 10)

6.3 Oil Fill and Maintenance

6.3.1 Oil Capacities

It is recommended that adequate supplies of PULSALube oil be on hand for periodic

changes and emergency requirements. The approximate amounts of oil required to fill

the GLM

DM7 pump to specified levels are:

Pump Capacity

Gearbox, Model DM7

PULSALube EP Gear Oil

2,500 ml (2.6 Qt)

Pulsafeeder Part No.

Description

Container Size

NP980010-001

PULSALube EP Gear Oil

500

NP980010-002

PULSALube EP Gear Oil

liter

NP980010-003

PULSALube EP Gear Oil

2.5

liter

NP980010-004

PULSALube EP Gear Oil

liter

6.3.2 Gearbox Oil Fill

Fill the gearbox with oil by removing the threaded oil fill cap on the top of the pump. Fill

with the proper oil (PULSALube EP Gear Oil) to the upper edge of the sight glass on the

side of the pump. Replace the cover or controller. Replace the oil fill cap. See figure 5.

Note that during operation, the oil should be visible at the middle of the sight glass.

Figure 5, oil filler cap and sight glass

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

Pas de commentaire

Pulsafeeder Pulsa GLM DM7 Manuel d'utilisateur Page 10