Pulsafeeder Pulsar Series HypoPump2 Manuel d'utilisateur télécharger pdf (Page 12)

6. Remove outer spring from Core Assembly (Seal Kit Assembly) and pull Core Assembly out.

7. Inspect Valve Body for O-rings that may have been left in and remove.

8. Remove the sleeve from the Core Tube and remove the O-ring.

9. Locate parts from the Seal Kit.

Locate and remove

both O-rings

Inspect Seal Kit parts and

insure the small spring is

in the core.

CAUTION: Do not unscrew any part

of the seal kit during inspection or

reassembly. Any change in length

will affect valve performance.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Pas de commentaire

Pulsafeeder Pulsar Series HypoPump2 Manuel d'utilisateur Page 12